Messtechnik Sachs Irinos IR, Руководство пользователя

Страница: 113 / 214

113
Irinos IR Users Manual © 2015 - 2016 Messtechnik Sachs GmbH, Germany
Setup
Before using the Irinos-System in an IT network, the DHCP-
Server must be deactivated. Therefore the Irinos-System
must be connected directly to a PC. Changing the IP
settings is done via the Irinos-Tool.
In case the DHCP functionality is not preferred, there are two
options:
a) The DHCP-Server at the Master-Box remains activated. Fixed IP
settings are assigned to the network port of the PC, for example:
IP address: 192.168.3.98
Subnet mask: 255.255.255.0
b) The DHCP-Server of the Master-Box is deactivated via the Irinos-
Tool. Almost any valid IP settings can be set. Fixed settings are
assigned to the network port of the PC. For further information,
take a look at the documentation of the Irinos-Tool.
For checking the IP connection, open a webbrowser at the PC and
enter the IP address of the Irinos-Box into the address line. If the
connection works properly, the website of the Irinos-System is
shown (displaying measurement values). In case any problems
appear, take a look at the first aid section.
7.4 Irinos-Tool
The Irinos-Tool has been designed as a multifunctional configuration
and test tool for the Irinos-System. The scope of functions includes:
o
Changing the network settings of the Irinos-System.
o
Generating the configuration file Msc.cfg for the MscDll.dll.
o
Listing the available Irinos-Boxes and measurement channels.
o
Configuration of the measurement channels for incremental
encoders (1Vpp or TTL/RS422).
o
Diagnostic functions for incremental encoder signals (1Vpp).
o
Displaying the static measurement values.
o
Performing firmware updates.
o
Reading the content of the diagnostic memory (and saving it to
a file).
Further information is available in the documentation of the Irinos-
Tool.
182