Messtechnik Sachs Irinos IR, Руководство пользователя

Страница: 45 / 214

45
Irinos IR Users Manual © 2015 - 2016 Messtechnik Sachs GmbH, Germany
Product descriptions
LED „Link“ Status
Off No ethernet connection established
On
Ethernet connection established, no data transfer
active
Flashing
Ethernet connection established, data transfer
active
IO-Bus
The IO-Bus is internally always handled as 64 digital in- and outputs.
I.e. if an Irinos-Box IR-MASTER is used, the first 64 digital inputs are
assigned to the IO-Bus. The same applies to the digital outputs. This
is also the case, if no I/O-Box is connected to the IO-Bus.
The 4 integrated digital in- and outputs are counted as input / output
65..68.
Each integrated in- and output has an additional Status-LED. It is
turned on, if the respective in- or output is at high level.
Analogue inputs
The analogue inputs are measured synchronously (no
multiplexing).
In order to allow a quick exchange of the Irinos-Box by an identical
type, all input channels are digitally pre-calibrated to deliver -32.000
digits at -10V and +32.000 digits at +10V.
Due to their high input impedance, the measurement value
may float if no input signal is connected. This is not a defect.
It is a consequence of the high-class input specificatons.