(1) Lens mount
For the installation of CS Mount lenses only.
(2) Back Focus adjustment :
A.Back Focus Screw :
Loosen this screw before you use the Focus
Adjustment. To maintain the correct focus
afterwards, ensure that it is tightened.
B.Focus Adjustment :
Adjust this dial to obtain correct back-focus
whilst using a CS mount lens.
(3) DC IRIS connector
(4) OSD joystick control
Press the OSD joystick control straight
down:
•
For two seconds to enter the Main
menu.
•
To enter a screen or to select a
submenu option. A selected menu
item blinks.
(5) Terminal Block
The camera will be forced to BW mode
with external contact. This function is
supported ICR DN camera only.
<Notice>
When forced to BW mode, the OSD
setting of DAY/NIGHT will be changed
to BW mode. But if cancelled external
contact, the OSD setting of DAY/NIGHT
will be forced to set CL mode.
(6) Video Output Terminal
BNC: Used to give out the video signal.
Connected to the video input terminal
of a monitor, switcher, etc. (to be
terminated with 75 ohm impedance)
(7) Power Connector
Connect to the respective power source.
•
For dual-voltage model: Connect to
DC12V or AC 24V power adapter.
•
For high-voltage model: Connect to
AC 90V~260V power source.
WARNING: This apparatus must be
EARTHED.
(8) Power Indicator
Light is on when power is applied.
(9) Tripod Stand
Application for mounting the camera onto
the camera holder. Effective for general
camera tripods.
5
Содержание SCB237-HN5
Страница 2: ......