Messoa SCB237-HN5, Инструкция по эксплуатации, Страница: 12 / 15

MENU SETTING
If selected PUSH mode in the appropriate position, whole area will perform white
balance.
If selected PUSH LOCK mode in the appropriate position, WHITE BALANCE will
perform once.
4.4 BACKLIGHT
Set Backlight compensation function. The default is OFF. Move the joystick control
LEFT or RIGHT to select OFF, BLC or HLC(Highlight Compensation) mode. When you
switched BLC, the function controls the light level to overcome severe backlighting
conditions. HLC activated automatically depending on the shooting condition (detects
night and high-luminance)
4.5 PICT ADJUST
Set PICTURE ADJUST function. Enter PICT ADJUST submenu as shown in the figure.
Move the joystick control UP or DOWN to set picture Brightness, Contrast, Sharpness,
Hue, or Gain value. In addition, you can set MIRROR to the ON mode then the picture
to be left or right.
4.6 ATR*
Set ATR(Adaptive Tone-curve Reproduction) function. The default is OFF. Move
the joystick control LEFT or RIGHT to select the ON mode then enter to the ATR
submenu, you can set LUMINACE and CONTRAST to optimize by image.
4.7 MOTION DET
Set Motion Detection function. The default is OFF. Move the joystick control LEFT
or RIGHT to select the ON mode then enter to the MOTION DET submenu. You can
set 4 motion areas to detect moving objectives and adjusts the motion detection
sensitivity. Use the LEFT/RIGHT functions of the joystick control to set the sensitivity
from 0 to 127.
*Also known as Wide Dynamic Range. This function expands the video dynamic range
of the camera and improves visibility of images even in high contrast environments.
10
MIRROR OFF
BRIGHTNESS 000
CONTRAST 128
SHARPNESS 128
HUE 128
GAIN 128
LUMINANCE LOW
CONTRAST LOW