4.10 NR
You can configure the 2D DNR (Digital Noise Reduction) settings and reduce noise
on the screen. Enter NR submenu as shown in the figure. Move the joystick control
UP or DOWN to set NR MODE. When you enable the NR MODE to the Y(BRIGHT) /
C(COLOR), C LEVEL or Y LEVEL mode, you can adjust Y LEVEL or C LEVEL depending
on your environment condition.
Note: When the Y Level is higher the noise in dark areas become lessened. Also,
resolution will become lower. When it is lower, there are more noise in dark areas.
When the C Level is higher the noise in dark areas become lessened. Also, resolution
will become lower. When it is lower, there are more noise in dark areas.
4.11 CAMERA ID
CAMERA ID displays ON or OFF. The default setting is OFF. You can set the ON mode
to add a camera title up to 26 characters with 2 lines and also select where the title
appears on the monitor screen.
4.12 SYNC
Set the vertical sync mode for INT or LL mode. Move the joystick control LEFT or
RIGHT to select the INT or LL mode. The default setting is INT. The LL option is only
avilable with AC power.
4.13 LANGUAGE
OSD supports 8 multi built in languages. The default setting is English. Move the
joystick control LEFT or RIGHT to select the English/ JAPANESS/ GERMAN/ FRANCE/
RUSSIA/ PORTTUGUES/ SPANISH/ SIMPLIFY CHINESE.
4.14 CAMERA RESET
Move to the CAMERA RESET mode then Press the ENTER key to recall factory
settings.
4.15 SAVE ALL
Save all settings and exit.
MENU SETTING
12
NR MODE
Y/C
Y LEVEL
000
C LEVEL
000
Содержание SCB237-HN5
Страница 2: ......