Messoa SCB237-HN5 Скачать руководство пользователя страница 13

MENU SETTING

 

         

4.8 PRIVACY 
Set PRIVACY function.  The default setting is OFF.  Move the joystick control LEFT 
or RIGHT to select the ON mode then enter to the PRIVACY submenu.  You can 

configure 8 privacy positions, set 8 privacy areas, choose different color zone and set 

transparency of 8 privacy zone.  However if you enable MOTION DET function, then 
PRIVACY function will be supported 4 zones only.  In addition, the image of PRIVACY 
can allow you to set MOISAIC function.

4.9 DAY/NIGHT
Set DAY/NIGHT function.  The default setting is AUTO.  Move the joystick control LEFT 
or RIGHT to select the AUTO, COLOR, BW mode.  Enter the AUTO submenu as shown 

in the figure.  Move the joystick control UP or DOWN to adjust BURST value and set 

the time before the camera switches to DAY-> NIGHT mode or NIGHT->DAY mode.  

When select Day->NIGHT level to set up switchover point of brightness from COLOR 
mode to B/W mode under different Lux levels.  
When select NIGHT->DAY level to set up switchover point of brightness from B/W 
mode to COLOR mode under different Lux levels.

If selected COLOR mode, you can force the camera to stay in DAY(COLOR) mode.
If selected BW mode, you can force the camera to stay in BW(NIGHT) mode.  The BW 
submenu allows you to select BURST to be ON or OFF.

11

DETECT SENSE 

100

BLOCK DISP 

OFF

MONITOR AREA 

OFF

AREA SEL  

1/4

   TOP 

 

000

   BOTTOM 

000

   LEFT 

 

000

   RIGHT   

000

REA SEL   

1/8

   TOP 

 

000

   BOTTOM 

000

   LEFT 

 

000

   RIGHT   

000

COLOR 

 

1

TRANSP   

0.00

MOSAIC   

OFF

BURST 

 

OFF

DELAY CNT 

100

DAY->NIGHT 

100

NIGHT->DAY 

100

Содержание SCB237-HN5
















Отзывы: