![background image](http://html1.mh-extra.com/html/messoa/ncr373/ncr373_user-manual_1775563010.webp)
9
2.2.3 Safety Wire Preparation
If you possess a safety wire (fall prevention wire, not supplied), connect the safety wire with one end to the mounting surface
and the other end to the safety-cord screw of the camera.
Figure 2 - 5: Mounting the Camera
Warning
Depending on the material of mounting surface, different screws and anchors than those supplied
may be required. To prevent the camera from falling off, ensure that it is mounted to a firm place using
a safety wire strong enough to withstand the total weight of the camera. (Pay also attention to the
finishing at the end of the wire.)
Caution
Safety wire must be connected with one end to the surface and the other end to the safety-cord screw of
the camera. By cabling so, it is possible to prevent the camera from accidental falling at any time.
Safety wire
Safety-cord screw of the camera