Messersi SL 45, Инструкция по эксплуатации

Страница: 16 / 34

SAFETY REGULATIONS FOR STOPPING AND PARKING
Never leave the machine with the engine running.
After leaving the
driver’s seat, and after ascertaining that there are no persons near the machine,
slowly lower and rest the equipment on the ground. Set the controls in the rest position.
If possible, park the machine in an area where no other machines are operating and where there is no
vehicle traffic.
Select a solid and level surface. If this is not possible, arrange the machine in a position
transverse to the slope, ensuring that there is no danger of sliding.
In public places or when visibility is reduced, place barriers around the machine to keep persons away.
When the machine is stopped on a slope, it is compulsory to make sure that all the four wheels
are completely on touch on the ground.
MAKING THE LIFTING ARMS SAFE
If the machine malfunctions or blocks with the arm raised it is necessary to make them
safe, by bringing them to the ground.
This is a very delicate operation that must be carried out by following the indications below.
1 - The operator must remain seated , with safety belts fastened.
2 - The area around the machine must be completely cleared of people .
3 -
Move the key inserted in the ignition commutator to position “1” (Ref. 2 of Fig.1).
4 - Press the lifting arms safety activation deactivation button (Ref. 4 of Fig.1).
5 - Activate the right joy-
stick and take it to position “I” (see page.32) in order to lower the lifting arms.
DANGER OF SHEARING
DANGER OF CRUSHING
FATAL INJURIES
ATTENTION
In case of EMERGENCY it is possible to block arm descent by pressing the same button again (Ref. 5
of Fig.1).
This operation must be carried out exclusively to make the lifting arms safe.