Messersi SL 45, Инструкция по эксплуатации

Страница: 5 / 34

The loading shovel has been designed and built for loading and unloading earth, gravel, sand, debris
and other loose material and is however suitable to operate in compliance with the features and
performance indicated in this manual. It is a machine with Diesel internal combustion motorisation with
hydrostatic transmission, joy-stick type servo-controls for traversing and manoeuvre of the arms and
the bucket. Movement is obtained using four pneumatic tyres with suitable tread to operate inside
without damaging the floor.
The mac
hine is equipped with an open or closed driver’s cabin with heating plant and an incorportaed
protective structure against tipping ROPS and against falling objects FOPS
– 1
st
level .
FOPS 2 nd level protection can be supplied on request for heavy duty and/or particular use; bolt in
replacement of the 4 eye-bolts.
MACHINE IDENTIFICATION
The machine is fitted with a special plate carrying the identification data of the machine, riveted to the
left front side of the frame. For any queries always quote the type and serial number stated on the
plate. For further explanations, please consult the modes on the Spare Parts Manual attached to the
machine. Other accessories which can be installed in the machine will be provided with their
nameplate, which can be seen from the external part of the accessory. For further information consult
the documentation related to the specific element.
MAIN PARTS OF THE MACHINE
1 - Loading bucket
2 - Non-slip access steps
3 - Safety bar
4 - Lifting eye-bolts
5 - Cabin ROPS-FOPS
6 - Hydraulic oil tank
7 - Cowling
8 - Diesel tank (RIGHT and LEFT)
9 - Lever arm
10 - Bucket release and various equipment
11 - Handle for ascent and descent
12 - Auxiliary power take off (P.T.O.)