© 2009 Merten by Schneider Electric
17
Push-button, 4-gang plus with room temperature control unit and IR receiver
Multifunction with RTCU and FanCoil 1817/1.0
Sending edge commands - 2 byte
With this edge function, you can send a 2-byte object in
floating point format or in integer format (with or without
sign). A distinction is made between the normal edge
function and the extended edge function:
• With the normal edge function, you can specify which
actions should be carried out when a push-button is
pressed, and which should be carried out when a
push-button is released.
• With the extended edge function, you can also set the
actions before and after the long button actuation pe-
riod is completed.
Status indication
The status LED can:
• Be switched on or off continuously.
• Light up when pressed (for a long period), and go out
when released.
• Flash.
• Display the status of the status feedback object.
Normal edge function
With the normal edge function, you can specify which
actions should be carried out when a push-button is
pressed, and which should be carried out when a push-
button is released. These actions could include:
• Send value 1 or value 2:
You can specify two values and set whether and how
they are to be transmitted.
• Object sends its value:
The object transmits the value which it currently has.
Therefore you can, for example, transmit a value with
the sending group address which was previously re-
ceived via another group address.
• No action
Available values are the floating point value or integer
values with/without sign.
Sending edge commands - 2 byte
Push-button X
Parameter
Setting
Select push-button function
Edges with 2 byte values
Select edge function
Normal (operate, release)
Extended (+ long and short op-
eration)
Parameter
Setting
Trigger status LED Switched on
Switched off
From status feedback object
Operation = ON / release = OFF
Long operation = ON / release = OFF
Flashes
Flashes when status feedback object equals 1
Flashes when status feedback object equals 0
Operation = flash / release = OFF
Long operation = flash / release = OFF
Push-button X
Parameter
Setting
Select edge function
Normal (operate, release)
Action on operation
Sends value 1
Sends value 2
Sends its value
None
Action at release
Sends value 1
Sends value 2
Sends its value
None
Push-button X - edges values
Parameter
Setting
Object type value
Floating point
Integer with sign
(-32768...32767)
Integer without sign (0 … 65535)
Value 1 = basis * factor
Basis (possible values in brack-
ets)
0,01, ... 327,68;
0,01
Factor (0-2047)
0 - 2047,
1000
Value 2 = basis * factor
Basis (possible values in brack-
ets)
0,01, ... 327,68;
0,01
Factor (0-2047)
0 - 2047,
2000
Value 1 (-32768 - 32767)
-32768...32767,
32767
Value 2 (-32768 - 32767)
-32768...32767,
-32768
Value 1 (0-65535)
0-65535,
65535
Value 2 (0-65535)
0-65535,
0