V5
75
5-
58
1-
02
0
1/1
5
2
Front:
*Can only be selected as alternative in combination with
a central unit insert (from version 1.5).
Rear:
A
Module interface
Connections, displays and operating
elements
A
Display
B
Menu button
C
Manual push-button
D
OK button
E
UP arrow button
• Push-button function (factory setting): Raising/
switching on
• Scene function*: Scene 1
F
DOWN arrow button
• Push-button function (factory setting): Lower-
ing/switching off
• Scene function*: Scene 2
G
LEDs
A
B
C
E
D
F
G
A
Display elements
|
The displayed symbols depend on the inserts
used and the sensors connected via PlusLink.
Individual display elements
You will see the following symbols on the display:
Standard display
Example of the standard display during operation:
A
Insert (see function overview)
B
Frame
C
Display timer module
Time, value and information display
Display of the weekdays
1 = Monday to 7 = Sunday
Automatic mode
Astro function
Random function
• Status display with switched
load: Light on or raising the blind
• Switching times for raising/
switching on
• Status display with switched
load: Lowering the blind
• Switching times for lowering/
switching off
Setting the time
Setting the day, month and year
Switching time 2
Sun protection function activated,
Setting the brightness threshold
Wind alarm is executed,
Setting the behaviour for wind
alarm
Switching between summer and
winter time
DCF timer is evaluated
Mounting the module
B
C
A
Initialising the module
After plugging the module onto the insert for the first
time, information on the module type and module version
are displayed for one second each. A standard display
follows this, either with a flashing clock symbol or a DCF
symbol.
Module type display: Display timer module
Standard display with flashing clock symbol
Set time and date (see Section "Setting module: Basic
menu settings").
Standard display with DCF symbol
|
The DCF timer is detected 5 minutes after con-
necting to the mains supply.
Time and date were received via a DCF timer.
Error message after changing over the module
If the module is plugged onto an insert that differs in func-
tionality from the previous one, the error message "FAIL"
appears and all LEDs flash red.
For initialisation, reset the module to the default settings.
|
When you do a reset to the default settings, previ-
ously saved settings are lost! The set time and
date are not reset.
1
Press the push-buttons and simultaneously for
10 seconds.
The standard display appears after resetting.
10 s
Menu
OK
Man
