merten 5801 Series, Руководство по эксплуатации

Страница: 52 / 202

51
Setting the sun protection and twilight functions
require the relevant function to be
active, so that you can read the
brightness value that is actually shown
by the sensor at that time, and use it in
your settings.
1
Press and hold the [Set] button until
prog appears in the display.
The device is now in set mode. The
"Set date and time" lights flash on the
display.
2
Press [
▲
] or [
▼
] until both the "sun"
and "moon" symbol in the display
flash or light up steadily.
3
To confirm, press [Set] .
The sun protection and twilight
function set mode is now active.
Switching the sun protection
function on/off:
Fig. 24: Setting the sun protection
function
1
Press the [
▲
] or [
▼
] buttons to
switch the sun protection function
on or off:
– Sun symbol shown = Sun
protection function switched on
– Sun symbol flashing = Sun
protection function switched off,
continue for twilight function
2
To confirm the selection, press
[Set] .
Setting the brightness value for the
sun protection function:
This display is only shown when you
have switched on the sun protection
function in the previous step.
Fig. 25: Setting the brightness value for
the sun protection function
The display shows the brightness value
measured by the sensor (on the left)
and the adjustable sun protection
brightness value (on the right), which
can be changed in increments of one
unit (00–99), empirical value
approx. 30.
Tip: Set the sun protection brightness
value when the sun is shining. Then
subtract 5 from the displayed
brightness value and set the sun
protection brightness value to the value
that results.
Examples:
Prog Zufall Astro
W S
A
B
C
Dat.
Uhr
Mo
Di
Mi
Do
Fr
Sa
So
Display approx. lux value
3 1500
8 4800
15 10000
25 21000
40 37000
68 74000
70 76000
Prog Zufall Astro
W S
A
B
C
Dat.
Uhr
Mo
Di
Mi
Do
F r
Sa
So