merten 5801 Series, Руководство по эксплуатации

Страница: 41 / 202

40
Activating program memories
As described in „Program memory and
switching times“, p. 32, you can save up
to 18 switching times, shared between
program memories [A], [B] or [C].
To activate a program memory and its
switching times:
1
Press [Mode] until the symbol for
the required program memory [A],
[B] or [C] appears in the display.
Fig. 5: Activating program memories
When program memory [C] is activated
and you press
[Mode] again, none of
the three program memory symbols
appears. Instead, the program
memories are deactivated, the blind
does not react to switching times or to
the sun protection/twilight function but
only operates in manual mode (see
„Manual operation of the blind“, p. 39).
You can use this feature, for example,
to stop the blind from moving when
this is not wanted, e.g. for a garden
party.
You can change the time on the device
to summer or winter time. You can also
activate the saved individual travel time
(see „Individual blind travel time“,
p. 36).
1
Briefly press the [Set] button to
switch between:
– Winter time W
– Activate winter time and learned
travel time W
– Summer time S
– Activate summer time and learned
travel time S
Fig. 6: Switching summer time/winter
time/learned travel time
When the learned travel time is not
activated, the blind moves for the
default time of 2 min.
Activating program
memories
Dat.
Uhr
Prog Zufall Astro
W
Dat.
Uhr
Prog Zufall Astro
Dat.
Uhr
Prog Zufall Astro
W
Dat.
Uhr
Prog Zufall Astro
Mode
Mode
Mode
Mode
A
W
W
C
B
Switching summer/winter
time/learned travel time
Dat.
Uhr
Prog Zufall Astro
W
Dat.
Uhr
Prog Zufall Astro
S
Dat.
Uhr
Prog Zufall Astro
W
Dat.
Uhr
Prog Zufall Astro
S
Set
Set
Set
Set