merten 5801 Series, Руководство по эксплуатации

Страница: 44 / 202

43
Setting the date and time
All functions can be selected and
adjusted as you require using set
mode.
Set mode is operated with four
buttons:
– [Set] Call up set mode, confirm a
selection
– [Mode] Selection and deselection
of various functions
– [
▲
] Scroll forwards
– [
▼
] Scroll backwards
From the basic display (current time),
press and hold the
[Set] button until
prog appears in the display. The blind
time switch is now in set mode for
"Time/Date" (flashing dot next to "Uhr/
Dat.").
You can scroll back and forth between
the various setting options using the
[
▲
] and [
▼
] buttons. The
corresponding symbol flashes in the
display.
Press
[Set] again when the setting you
want to change is shown. You can now
change the settings (see following
sections).
|
Note: If, whilst in set mode, you
do not press any buttons for
2 min, the device switches back
to the basic display. Any changes
made up to then will be saved.
You can exit set mode at any time by
pressing and holding the
[Set] button
for about 3 sec. Any changes made up
to then will be saved.
Tip: You can select some values more
quickly by pressing and holding [
▲
] and
[
▼
] . The values will presently start to
change in larger steps.
1
Press and hold the [Set] button until
prog appears in the display.
The device is now in set mode. The
"Set date and time" lights flash on the
display.
2
Press the [Set] button.
3
Press [
▲
] or [
▼
] to set summer
time ( S ) or winter time ( W ).
4
To confirm, press [Set] .
Fig. 8: Setting summer time/winter
time
5
Press the [
▲
] or [
▼
] buttons to set
the current month ( 01 – 12 ).
6
To confirm, press [Set] .
Setting the date and time
Dat.
Uhr
Prog Zufall Astro
Mo
Di
Mi
Do
Fr
Sa
So
W