Cover and Harness Reinstallation
Page 49
Care and Cleaning, Continued
1. Place the cover on the
restraint.
2. Lay the harness/buckle
assembly out on the
cover (Figure A).
3. From the front side of
the restraint, grasp
one of the harness an-
chors and twist it so
that it can be inserted
into its anchor slot
(Figure B).
4. Insert the anchor
through the slot
(Figure B); then pull it
through to the back
side of the restraint
(Figure C) and place it
flat against the re
straint (Inset D).
5. Repeat Steps 3 and 4
for the other harness
anchor.
6. From the front side of
the restraint, insert
one of the harness
straps through the ap-
propriate slot (Figure
E), according to pages
18 and 19, and pull it
B
A
C
E
D