Page 42
Attaching the Tether to the Vehicle
Note: If the seating posi-
tion has a headrest, it
must be removed, or the
tether must be routed
underneath it (Figure A).
1. Attach the tether assem-
bly to the restraint ac-
cording to the steps on
Page 12.
2. Route the tether assem-
bly over the top of the
vehicle seat and attach it
to the appropriate tether
anchor as specified in
your vehicle owner’s
manual (Figures B and C).
3. Verify that the webbing is
not twisted.
Warning:
·
Please review your vehicle owner’s manual carefully to
determine your vehicle’s tether anchor locations. Make
sure you attach the tether hook only to a child seat
tether anchor. The use of an anchor which is not speci-
fied as a child seat tether anchor by your vehicle owner’s
manual may result in injury or death to your child in the
event of a crash.
·
You must attach the tether(s) provided with this re-
straint to the appropriate vehicle tether anchor, unless
the restraint is installed with the long belt path using the
lap and shoulder belt and EZ-Tether Connector Strap.
B
C
A
