MERQUIP COSMETAL H2OMY IN F, Руководство по установке, использованию и техническому обслуживанию

Страница: 6 / 22

1 Operator side
2 Rear side
3 Electrical power supply socket
4 Main switch
5 Cold water thermostat
6 Mains water inlet 3/4M or ø 8mm
7 CO2 inlet ø 6mm (WG model)
8 Cold water outlet
9 Carbonated water outlet (WG model)
10 Water entrance for basin loading
11 Level and basin unloading tube
12 Basin water level indicator
13 Label bearing the technical data and serial number
14 Heat outlet vent (do not cover)
15 Casing - easily removable to reach interior parts
GB
5HGÀRDWHULQGLFDWLQJWUD\¿OOLQJ
:DUQLQJOLJKWIRULQVXI¿FLHQWZDWHU:*PRGHOV
18 Network voltage warning light
19 Cold water button
20 Button for water at room temperature
21 Sparkling water button (WG models)
22 Small tank to collect dripping water.
It is removable and can be connected to a drain.
23 Hot water thermostat
24 Hot water switch
25 Hot water buttons (H - HWG models) must be pressed at the
same time for distribution
26 LED “HEATING” indicator lights up during the heating phase
27 Hot water outlet (OUT HOT)
28 Output water environment (OUT AMB)
6