Meridian Configuration Program, Руководство по настройке

Страница: 50 / 58

R o o m
c o r r e c t i o n
4 6
This section describes how to change the room correction or
configuration settings of the digital surround controller at a later
date, subsequent to uploading the original version.
Note: You can only edit or add to existing profiles if you have the
MSL file and mrd folder originally used to design the profile. If you
do not have the original MSL file and mrd folder you will need to
make new measurements, create new profiles, and then store these
to the digital surround controller.
To edit an existing profile, or add a new profile
• Run the Meridian Configuration Program and open the MSL file
used to create the original profiles.
If you have changed settings on the digital surround controller
since the original profiles were made, and you want to retain these
changes:
• On the File menu, click Save as to save the MSL file under a
new name.
This will also create a renamed copy of the mrd folder containing
the original measurements and profiles.
To fetch the settings from the digital surround controller:
• On the Products page, click the controller with the right mouse
button, then click Fetch… on the context menu.
• Run the Meridian Room Correction program.
• When the Set up wizard is displayed click the Cancel button.
• Select the Profiles tab, and proceed as described in Editing
filters, page 44, or Creating multiple profiles, page 41.
To change other settings if you have the original MSL file
and mrd folder
• Run the Meridian Configuration Program and open the original
MSL file.
If you want to keep the original settings:
• On the File menu, click Save as to save a copy of the MSL file
and mrd folder under a new name.
• Change the settings as required and store the new settings to
the digital surround controller.
For more information about changing configuration settings using
the Meridian Configuration Program refer to the
G68 Digital
Surround Controller Installation Guide.
To change other settings if you have lost the original MSL
file and mrd folder
If the original MSL file and mrd folder are not available you will be
able to change all non-room correction settings, and which room
correction profile you want to use with a given preset.
• Start a new document.
• On the File menu, click Fetch to fetch the settings from the
digital surround controller.
Changing settings at a later date