Auto set up
R o o m
c o r r e c t i o n
3 1
This section explains how to create a basic room correction using
default settings.
The Room Correction program is run from within the Meridian
Configuration Program, and adds the room correction profiles to
the current configuration file.
The room should be as you would normally use for listening. Close/
open doors, close/open curtains, and position your screen and
furniture as they would normally be for listening.
To run the Room Correction program
• Click the
Store
button on the
Room Correction store
page.
After successfully storing the configuration to the surround
controller the
MRC
set up wizard
will be displayed:
• Click the
Next
button to continue.
The next page allows you to set up the input for microphone or
Sound Pressure Level meter:
• Leave the input sensitivity at the default value.
• Click the
Next
button to continue.
• Connect the SPL meter or microphone to the analogue input
A8 (L), switch on the SPL meter and position it at the listening
position.
When using an SPL meter the C weighting must be used, and the
90dB range is recommended, unless the loudspeakers measured
less than 75dB SPL during the calibration in which case the 80dB
range is recommended.
Содержание Configuration Program
Страница 1: ...Meridian Configuration Program Guide...
Страница 4: ...C o n t e n t s i v...
Страница 56: ...R o o m c o r r e c t i o n 5 2...