Meridian 405 SLD SEED EXPRESS, Руководство оператора

Страница: 45 / 74

Revised 08.2021 3-25
Operator’s Manual: 405 SLD Seed Express
™
Bulk Seed Tender
®
®
PERSONAL INJURY HAZARD
Do not use the conveyor
if the guard has been removed.
UPENDING HAZARD
Always load the front seed box first to maintain
a positive tongue weight. Negative tongue
weight can cause the hitch to rapidly swing
upward if not securely fastened to the tow
vehicle, which can result in personal injury.
17. Start the conveyor belt.
- Run the belt at the desired speed by using
the INC button on remote control handset.
IMPORTANT:
Do not open the slide gates when the
conveyor is in the self-filling position.
18. Begin filling the conveyor hopper to fill the
seed tender.
19. When the seed tender is full, stop the
conveyor belt
20. Lower the hopper canvas frame.
21. Raise the stand.
22. Return the conveyor arm to the storage
position:
- Rotate the arm to align the triangular
indicator on the conveyor pivot plate with
the alignment plate on the frame.
23. Guide the ball coupling into conveyor hitch
receiver.
IMPORTANT: Be sure ball coupling is free
of dirt and debris before placing it into the
receiver.
42
15. If desired, release the stand lock pin and
rotate the stand downward. Engage the lock
pin when the stand is fully extended.
16. Raise the hopper by pushing the handlebar
forward. The hopper will lock into place when
the handle has reached the end of the rail.
CAUTION
To prevent personal injury, do not use
the conveyor if the guard has been
removed.
CAUTION
Always load compartment 1 first to maintain
a positive tongue weight. Negative tongue
weight can cause the hitch to rapidly swing
upward if not securely fastened to the tow vehicle,
which can result in personal injury.
17. Start the conveyor. Refer to section 5.3 for
setting automatic seed delivery functions.
Do not open the slide gates when the
conveyor is in the self-filling position.
Fig 49 - Hopper guard
43
18. Allow the seed to flow into the conveyor from
the external source to fill the seed tender or
other container.
19. When the seed tender or other container is
filled, stop the conveyor.
20. Return the conveyor arm to the storage
position by first rotating the conveyor arm to
align the triangular indicator on the conveyor
pivot plate with the alignment plate on the
frame, as shown.
MMG-00324
21. Lower the hopper. Raise the stand, if used.
22. Guide the ball coupling into conveyor hitch
receiver. Make sure ball coupling is free of dirt
and debris before placing it into the receiver.
23. Press and hold the toggle switch upward to
lock the ball coupling into the conveyor hitch
receiver.
43
18. Allow the seed to flow into the conveyor from
the external source to fill the seed tender or
other container.
19. When the seed tender or other container is
filled, stop the conveyor.
20. Return the conveyor arm to the storage
position by first rotating the conveyor arm to
align the triangular indicator on the conveyor
pivot plate with the alignment plate on the
frame, as shown.
MMG-00324
21. Lower the hopper. Raise the stand, if used.
22. Guide the ball coupling into conveyor hitch
receiver. Make sure ball coupling is free of dirt
and debris before placing it into the receiver.
23. Press and hold the toggle switch upward to
lock the ball coupling into the conveyor hitch
receiver.
Fig 50 - Tender in self-filling position
Fig 51 - Rotate conveyor arm
Fig 52 - Ball coupling