Mercury Xi5 Wireless Edition, Руководство пользователя, Страница: 48 / 53

Symptom Possible Cause Resolution
Inaccurate temperature
reading (models with
internal sonar)
Lower unit not fully
submerged
Adjust the depth
of the motor.
Ensure the lower
unit is fully
submerged.
Refer to
Adjusting the
Motor Depth
.
Damaged nose cone
Contact a
Service Center
.
Damaged sonar cable
Contact a
Service Center
.
Motor is difficult to deploy
or return to stowed
position
Sticking latch mechanism
Lubricate the
latch mechanism.
Refer to
Inspection and
Maintenance
Schedule
.
Difficulty removing
propeller
Bent propeller pin
Hold one blade
and lightly tap the
opposite blade
with a rubber
mallet.
Use a putty knife
on both sides of
the propeller to
apply equal
pressure.
Bent armature shaft
Contact a
Service Center
.
Troubleshooting the Foot Pedal and Handheld Remote
ERASING THE RECEIVER'S MEMORY
Erasing the receiver's memory will erase all electronic ID numbers that are
stored in the receiver's memory.
1. Plug in the battery cable to a power source. In less than ten seconds,
press the
left arrow
,
right arrow
,
+
, and
–
buttons on the handheld
remote simultaneously.
2. Listen for a long beep indicating the receiver has erased all stored
electronic ID numbers.
OWNER SERVICE ASSISTANCE
42
eng