manualshive.com logo in svg

Mercury Xi5 Wireless Edition, Руководство пользователя, Страница: 41 / 53

Поделиться
Скачать
Mercury Xi5 Wireless Edition Скачать руководство пользователя страница 41

Refer to the 

Inspection and Maintenance Schedule

 and complete the

appropriate care instructions to prepare your trolling motor for storage. Store

the trolling motor in a dry location where it will not be affected by temperatures

below –29 °C (–20 °F).
IMPORTANT: Trolling motors stored in temperatures below 0 °C (32 °F) should

be operated slowly for a minimum of 15 minutes before going above 30%

throttle.

Battery Inspection

The battery should be inspected at periodic intervals to ensure proper trolling

motor operation.
IMPORTANT: Read the safety and maintenance instructions that accompany

your battery.

1. Ensure that the battery is secured to the vessel.
2. Ensure that the battery cable terminals are clean, tight, and correctly

installed. For installation instructions, refer to 

Battery Connection

 in the

Product Installation, Wiring, and Battery Information

 section of this

manual.

3. Ensure that the battery is equipped with a battery box to prevent

accidental shorting of the battery terminals.

Propeller Replacement

!

 WARNING

Performing service or maintenance without first disconnecting the battery can

cause  product  damage,  personal  injury,  or  death  due  to  fire,  explosion,

electrical shock, or unexpected motor starting. Always disconnect the battery

cables from the battery before maintaining, servicing, installing, or removing

motor components.

REMOVING THE PROPELLER

1. Disconnect the power cables from the battery.
2. While holding the propeller blade with one gloved hand, use a 9/16 in.

wrench or a ratchet and a 9/16 in. socket to remove the propeller nut.

Remove the propeller nut and washer (or anode, for saltwater models).

IMPORTANT: Remove the propeller nut with a wrench or a ratchet and socket.

Using another tool may damage the propeller nut or shaft. If the propeller

cannot be removed easily, use a rubber mallet to lightly tap the back side of

the opposite blade. If the propeller cannot be removed, have the propeller

removed by an authorized dealer.

MAINTENANCE AND STORAGE

eng

35

  

Содержание Xi5 Wireless Edition






















































Отзывы:

Нет отзывов