Mercury MerCruiser 4.3 TKS Скачать руководство пользователя | Manualshive

Страница: 48 / 122

background image

Section 4 - Specifications

Page 40

90-899883179 OCTOBER 2007

Fuel Requirements

IMPORTANT: Use of improper gasoline can damage your engine. Engine damage
resulting from the use of improper gasoline is considered misuse of the engine, and
damage caused thereby will not be covered under the limited warranty.

Fuel Ratings

Mercury MerCruiser engines will operate satisfactorily when using a major brand of

unleaded gasoline meeting the following specifications:

USA and Canada—

having a posted pump Octane Rating of 87 (R+M)/2 minimum.

Premium gasoline [92 (R+M)/2 Octane] is also acceptable. Do not use leaded gasoline.

Outside USA and Canada—

having a posted pump Octane Rating of 90 RON minimum.

Premium gasoline (98 RON) is also acceptable. If unleaded gasoline is not available, use

a major brand of leaded gasoline.

Using Reformulated (Oxygenated) Gasolines (USA Only)

This type of gasoline is required in certain areas of the USA. The 2 types of oxygenates

used in these fuels is Alcohol (Ethanol) or Ether (MTBE or ETBE). If Ethanol is the

oxygenate that is used in the gasoline in your area, refer to Gasolines Containing Alcohol.
These Reformulated Gasolines are acceptable for use in your Mercury MerCruiser engine.

Gasolines Containing Alcohol

If the gasoline in your area contains either methanol (methyl alcohol) or ethanol (ethyl

alcohol), you should be aware of certain adverse effects that can occur. These adverse

effects are more severe with methanol. Increasing the percentage of alcohol in the fuel can

also worsen these adverse effects.
Some of these adverse effects are caused because the alcohol in the gasoline can absorb

moisture from the air, resulting in a separation of the water/alcohol from the gasoline in the

fuel tank.
The fuel system components on your Mercury MerCruiser engine will withstand up to 10%

alcohol content in the gasoline. We do not know what percentage your boat's fuel system

will withstand. Contact your boat manufacturer for specific recommendations on the boat's

fuel system components (fuel tanks, fuel lines, and fittings). Be aware that gasolines

containing alcohol may increase:
• Corrosion of metal parts
• Deterioration of rubber or plastic parts
• Fuel permeation through rubber fuel lines
• Difficulty starting and operating the engine

!

WARNING

Fuel leakage is a fire or explosion hazard, which can cause serious injury or death.

Periodically inspect all fuel system components for leaks, softening, hardening, swelling,

or corrosion, particularly after storage. Any sign of leakage or deterioration requires

replacement before further engine operation.

Because of possible adverse effects of alcohol in gasoline, we recommend only

alcohol‑free gasoline when possible. If the only fuel available contains alcohol or if you do

not know whether the fuel contains alcohol, inspect for leaks and abnormalities more

frequently.

«
...
46
47
48
49
50
...
»

Содержание MerCruiser 4.3 TKS



























































































































Отзывы:

Нет отзывов

Похожие инструкции для MerCruiser 4.3 TKS

Бренд: PCM Страницы: 83

290000 Vanguardv Gasoline

Бренд: Briggs & Stratton Страницы: 13

Бренд: Craftsman Страницы: 48

Бренд: Craftsman Страницы: 48

Бренд: SunStar Страницы: 86

Бренд: YS Страницы: 2

Бренд: YS Страницы: 2

Бренд: YS Страницы: 2

Бренд: Maverick Страницы: 12

Бренд: Vanguard Страницы: 136

Ultra Drive UN-99

Бренд: Bettcher Страницы: 29

Бренд: Ingersoll-Rand Страницы: 127

ZAtop SM250.100C

Бренд: ZIEHL-ABEGG Страницы: 16

Бренд: Asmo Marine Страницы: 8

Бренд: Briggs & Stratton Страницы: 20

140000 Professional 1000 Series

Бренд: Briggs & Stratton Страницы: 36

Бренд: Nanni Страницы: 104

Бренд: Nanni Страницы: 191

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды