Mercury FourStroke 4 Скачать руководство пользователя

Страница: 33 / 99

WARRANTY INFORMATION

eng

HOW TO OBTAIN WARRANTY COVERAGE: The customer

must provide Mercury with a reasonable opportunity to repair

and reasonable access to the product for warranty service.

Warranty claims shall be made by delivering the product for

inspection to a Mercury dealer authorized to service the product.

If purchaser cannot deliver the product to such a dealer, please

notify Mercury Marine and Mercury will then arrange for the

inspection and any covered repair. Purchaser, in that case, shall

pay for all related transportation charges and/or travel time. If the

service provided is not covered by this warranty, purchaser shall

pay for all related labor and material, and any other expenses

associated with that service. Purchaser shall not, unless

requested by Mercury, ship the product or parts of the product

directly to Mercury.
WHAT MERCURY WILL DO: Mercury Marine's sole and

exclusive obligation under this warranty is limited to, at our

expense and at our option, repairing or replacing defective parts

with new or Mercury Marine certified remanufactured parts, or

refunding the purchase price of the Mercury product. Mercury

reserves the right to improve or modify products from time to

time without assuming an obligation to modify products

previously manufactured.
WHAT IS NOT COVERED: This limited warranty does not cover

routine maintenance items, tune‑ups, adjustments, normal wear

and tear, damage caused by abuse, abnormal use, use of a

propeller or gear ratio that does not allow the engine to run in its

recommended wide‑open throttle RPM range (see General

Information ‑ Specifications), operation of the product in a

manner inconsistent with the recommended operation

procedures, neglect, accident, submersion, improper installation

(proper installation specifications and techniques are set forth in

the installation instructions for the product), improper service, jet

pump impellers and liners, operation with fuels, oils, or lubricants

which are not suitable for use with the product (see Fuel and

Oil), alteration or removal of parts.

Содержание FourStroke 4




































































































Результаты поиска

Содержание FourStroke 4

Отзывы:

Похожие инструкции для FourStroke 4

Бренды по названию

Популярные бренды

Mercury FourStroke 4, Руководство пользователя

Результаты поиска

Содержание FourStroke 4

Отзывы:

Похожие инструкции для FourStroke 4

Бренды по названию

Популярные бренды