Mercury FourStroke 4 Скачать руководство пользователя

Страница: 23 / 99

WARRANTY INFORMATION

eng

HOW TO OBTAIN WARRANTY COVERAGE:

The customer

must provide Mercury with a reasonable opportunity to repair,

and reasonable access to the product for warranty service.

Warranty claims shall be made by delivering the product for

inspection to a Mercury dealer authorized to service the product.

If purchaser cannot deliver the product to such a dealer, written

notice must be given to Mercury. We will then arrange for the

inspection and any covered repair. Purchaser in that case shall

pay for all related transportation charges and/or travel time. If the

service provided is not covered by this warranty, purchaser shall

pay for all related labor and material, and any other expenses

associated with that service. Purchaser shall not, unless

requested by Mercury, ship the product or parts of the product

directly to Mercury. Proof of registered ownership must be

presented to the dealer at the time warranty service is requested

in order to obtain coverage.

WHAT IS NOT COVERED:

This limited warranty does not cover

routine maintenance items, tune‑ups, adjustments, normal wear

and tear, damage caused by abuse, abnormal use, use of a

propeller or gear ratio that does not allow the engine to run in its

recommended wide‑open throttle RPM range (see the Operation

and Maintenance Manual), operation of the product in a manner

inconsistent with the recommended operation/duty cycle section

of the Operation and Maintenance Manual, neglect, accident,

submersion, improper installation (proper installation

specifications and techniques are set forth in the installation

instructions for the product), improper service, use of an

accessory or part not manufactured or sold by us, jet pump

impellers and liners, operation with fuels, oils or lubricants which

are not suitable for use with the product (see the Operation and

Maintenance Manual), alteration or removal of parts, or water

entering the engine through the fuel intake, air intake or exhaust

system, or damage to the product from insufficient cooling water

caused by blockage of the cooling system by foreign body,

running the engine out of water, mounting the engine too high on

the transom, or running the boat with the engine trimmed out too

far.

Содержание FourStroke 4




































































































Результаты поиска

Содержание FourStroke 4

Отзывы:

Похожие инструкции для FourStroke 4

Бренды по названию

Популярные бренды

Mercury FourStroke 4, Руководство пользователя

Результаты поиска

Содержание FourStroke 4

Отзывы:

Похожие инструкции для FourStroke 4

Бренды по названию

Популярные бренды