Mercury FourStroke 4 Скачать руководство пользователя

Страница: 27 / 99

WARRANTY INFORMATION

eng

Corrosion damage caused by stray electrical currents (onshore

power connections, nearby boats, submerged metal) is not

covered by this corrosion warranty and should be protected

against by the use of a corrosion protection system, such as the

Mercury Precision Parts or Quicksilver MerCathode system

and/or Galvanic Isolator. Corrosion damage caused by improper

application of copper base antifouling paints is also not covered

by this limited warranty. If antifouling protection is required,

Tri‑Butyl‑Tin‑Adipate (TBTA) base antifouling paints are

recommended on Outboard and MerCruiser boating applications.

In areas where TBTA base paints are prohibited by law, copper

base paints can be used on the hull and transom. Do not apply

paint to the outboard or MerCruiser product. In addition, care

must be taken to avoid an electrical interconnection between the

warranted product and the paint. For MerCruiser product, an

unpainted gap of at least 38 mm (1.5 in.) should be left around

the transom assembly. Refer to the Operation and Maintenance

Manual for additional details.
For additional information regarding events and circumstances

covered by this warranty, and those that are not, see the

Warranty Coverage section of the Operation and Maintenance

Manual, incorporated by reference into this warranty.

DISCLAIMERS AND LIMITATIONS:
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

A PARTICULAR PURPOSE ARE EXPRESSLY DISCLAIMED. TO THE

EXTENT THAT THEY CANNOT BE DISCLAIMED, THE IMPLIED

WARRANTIES ARE LIMITED IN DURATION TO THE LIFE OF THE

EXPRESS WARRANTY. INCIDENTAL AND CONSEQUENTIAL DAMAGES

ARE EXCLUDED FROM COVERAGE UNDER THIS WARRANTY. SOME

STATES/COUNTRIES DO NOT ALLOW FOR THE DISCLAIMERS,

LIMITATIONS AND EXCLUSIONS IDENTIFIED ABOVE, AS A RESULT,

THEY MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU

SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER LEGAL

RIGHTS WHICH VARY FROM STATE TO STATE AND COUNTRY TO

COUNTRY.

Содержание FourStroke 4




































































































Результаты поиска

Содержание FourStroke 4

Отзывы:

Похожие инструкции для FourStroke 4

Бренды по названию

Популярные бренды

Mercury FourStroke 4, Руководство пользователя

Результаты поиска

Содержание FourStroke 4

Отзывы:

Похожие инструкции для FourStroke 4

Бренды по названию

Популярные бренды