Mercury FourStroke 4 Скачать руководство пользователя

Страница: 26 / 99

WARRANTY INFORMATION

eng

WHAT MERCURY WILL DO: Mercury's sole and exclusive

obligation under this warranty is limited to, at our option,

repairing a corroded part, replacing such part or parts with new

or Mercury Marine certified remanufactured parts, or refunding

the purchase price of the Mercury product. Mercury reserves the

right to improve or modify products from time to time without

assuming an obligation to modify products previously

manufactured.
HOW TO OBTAIN WARRANTY COVERAGE: The customer

must provide Mercury with a reasonable opportunity to repair,

and reasonable access to the product for warranty service.

Warranty claims shall be made by delivering the product for

inspection to a Mercury dealer authorized to service the product.

If purchaser cannot deliver the product to such a dealer, written

notice must be given to Mercury. We will then arrange for the

inspection and any covered repair. Purchaser, in that case, shall

pay for all related transportation charges and/or travel time. If the

service provided is not covered by this warranty, purchaser shall

pay for all related labor and material, and any other expenses

associated with that service. Purchaser shall not, unless

requested by Mercury, ship the product or parts of the product

directly to Mercury. Proof of registered ownership must be

presented to the dealer at the time warranty service is requested

in order to obtain coverage.
WHAT IS NOT COVERED: This limited warranty does not cover

electrical system corrosion; corrosion resulting from damage,

corrosion which causes purely cosmetic damage, abuse, or

improper service; corrosion to accessories, instruments, steering

systems; corrosion to factory installed jet drive unit; damage due

to marine growth; product sold with less than a one year limited

Product warranty; replacement parts (parts purchased by

customer); products used in a commercial application.

Commercial use is defined as any work or employment related

use of the product, or any use of the product which generates

income, for any part of the warranty period, even if the product is

only occasionally used for such purposes.

Содержание FourStroke 4




































































































Результаты поиска

Содержание FourStroke 4

Отзывы:

Похожие инструкции для FourStroke 4

Бренды по названию

Популярные бренды

Mercury FourStroke 4, Руководство пользователя

Результаты поиска

Содержание FourStroke 4

Отзывы:

Похожие инструкции для FourStroke 4

Бренды по названию

Популярные бренды