Mercury Champ 600, Руководство пользователя

Страница: 9 / 32

Fender ’
Champion “600”
•
Mercury Upgrade Kit
9
This
project
and
its
documentation
is
the
result
of
technical
investigations
made
by
the
engineering
staf
f of
Mercury Magnetics
. The
disclosure
of
the
information
herein
may
pertain
to
proprietary
rights
and
the
furnishing
of
these
documents
does
not
constitute
an
expresed
or
implied
license
to
use
such
materials.
VERSION: 04-05-11
Revision: 04-05-11
Back of Main PCB modifications
www.MercuryMagnetics.com
This project and its documentation are the result of technical investigations made by the engineering staff of Mercury Magnetics . The disclosure of the information herein may pertain to proprietary rights, and the furnishing of these documents does not constitute an expressed or implied
license to use such materials. Copyright © 2007–2011 by Mercury Magnetics . All Rights Reserved. Fender is a registered trademark of FMIC. Champion and Chamption “600” are trademarks of FMIC. Axiom and ToneClone are registered trademarks licensed to Mercury Magnetics .
Mercury Magnetics , Mini-Choke and “The Heart & Soul of Your Amp, are trademarks licensed to Mercury Magnetics . Mercury Magnetics is not affiliated with FMIC (Fender Musical Instruments Corp.).
Drill 1/16” hole here
for Choke lead
Reveal
trace here
(for soldering
Choke lead)
Reveal
trace here
(for soldering
Choke lead)
Cut trace
here
Cut trace
here
Cut trace
here
Jumper
here
(from left side of
D1 to top of C4)
Jumper
here
(from left side
of R10 to pin 8
of tube socket)
Drill 1/16” hole here
for Choke lead
Jumper
here
(from right side of
R25 to indicated
pin of tube socket)
Jumper
here
(from right side of
R14 to indicated
pin of tube socket)