Mercury Champ 600 Скачать руководство пользователя страница 2

Страница: 2 / 32

Fender

Champion “600”

•

Mercury Upgrade Kit

This project and its documentation is the result of technical investigations made by the engineering staff of

Mercury Magnetics

. The disclosure of the information herein may pertain to proprietary rights and

the furnishing of these documents does not constitute an expresed or implied license to use such materials.

If you do not know how to read a schematic, we strongly recommend

that you take this project to a qualified technician for installation.

All

Mercury Magnetics

products are 100% handmade by us in California, USA.

Mercury Magnetics

, Mini-Choke,

Mercury Upgrade Kit, and “The Heart & Soul of Your Amp” slogan are trademarks licenced to

Mercury Magnetics

. Axiom

and ToneClone are registered trademarks licensed to

Mercury Magnetics

. Fender and Champion “600” are trademarks of

FMIC (Fender Musical Instruments Corp.).

Mercury Magnetics

is not affiliated with FMIC Amplification. This project and its

documentation is the result of technical investigations made by the engineering staff of

Mercury Magnetics

. The disclosure of the

information herein may pertain to proprietary rights and the furnishing of these documents does not constitute an expresed or implied

license to use such materials.

Mercury Magnetics

products are UL (Underwriters Laboratories Inc.) recognized components for the USA and Canada. OBJY2

component systems, electrical insulation, E120568. UL Recognition, class 130(b) – Class 200(n). OBJY8 component systems,

electrical insulation, certified for Canada, class 130(b) – Class 200(n).

Mercury Magnetics

transformers and other products are in compliance with the European Union RoHS Directive 2020/95/EC with

respect to the following substances: lead (Pb), mercury (Hg), cadmium (Cd, hexavalent chromium (CR (VI)), polybrominated biphenyls

(PBB), and polybrominated diphenyl ethers (PBDE).

Attention: Modifying your Fender Champion “600” amp voids the FMIC warranty!

Written & produced by the staff of

Circuitry design by Alan Cyr

(www.Amp-Exchange.com)

9167 Independence Ave.

Chatsworth, CA 91311

(818) 998-7791 • FAX: (818) 998-7835

Skype

: paul.patronete or patrick.selfridge

www.

MercuryMagnetics

.com

[email protected]

Содержание Champ 600

































Результаты поиска

Содержание Champ 600

Отзывы:

Похожие инструкции для Champ 600

Бренды по названию

Популярные бренды

Mercury Champ 600, Руководство пользователя

Результаты поиска

Содержание Champ 600

Отзывы:

Похожие инструкции для Champ 600

Бренды по названию

Популярные бренды