16
Fender
Champion “600”
•
Mercury Upgrade Kit
This project and its documentation is the result of technical investigations made by the engineering staff of
Mercury Magnetics
. The disclosure of the information herein may pertain to proprietary rights and
the furnishing of these documents does not constitute an expresed or implied license to use such materials.
The following sequence shows the locations of the various buss wires that you will be soldering onto the board. A buss
wire is used to jump one location to another on a circuit board. Use the wire supplied with the kit. See the schematics
at the front of the manual for the precise locations. Note that we have intentionally located buss wires on both sides of
the board. Typically buss wires are eitehr soldered into an existing hole, or onto a terminal. Study these photos carefully
before processing.
The 4 locations of the buss wires on the top of the circuit board.
Note that #2 (R18) is optional. The jumper gives the amp
more gain. We recommend trying the amp with an and without this jumper in order to determine which tone you prefer.
The 4 locations of the buss wires on the underside of the circuit
board. See the following photographs of close-ups of location 2,
3 and 4. Note that the 1st location uses the shielded wire.
1
6
7
2
2
8
3
3
4
4
5
Содержание Champ 600
Страница 1: ...VERSION 040711 ...
