CDS G3 INTERFACE KIT
90-8M0101386 DECEMBER 2014
Page 7 / 8
6. On the next screen, select
Install the software automatically (Recommended)
. Click
Next
to continue.
52811
7. When the wizard has finished installing the software, click
Finish
to close the window. Once the installation is completed,
the green power (PWR) light on the CDS G3 SmartCraft diagnostic interface will illuminate solid green.
8. Repeat steps 1–7 for all USB ports on your PC.
9. Open CDS G3. The CAN P and CAN H status indicators should be yellow or green, depending on if the engine is
connected and powered up. The software will also detect the SmartCraft diagnostic interface cable.
Lower left corner of CDS G3 home screen
a -
CAN status
b -
Interface cable detected
52812
a
b
