90-8M0101386 DECEMBER 2014
© 2014 Mercury Marine
Page 1 / 8
CDS G3 INTERFACE KIT
IMPORTANT: This document guides our dealers, boatbuilders, and company service personnel in the proper installation or
service of our products. If you have not been trained in the recommended servicing or installation procedures for these or
similar Mercury Marine products, have the work performed by an authorized Mercury Marine dealer technician. Improper
installation or servicing of the Mercury product could result in damage to the product or personal injury to those installing or
operating the product.
NOTE:
After completing installation, place these instructions with the product for the owner's future use.
Components Contained in Kit
57417
2
1
3
4
NOVEMBER 2014
1.6
P/N 8M0098655
2014
Ref.
Qty.
Description
Part Number
1
1
CAN P/CAN H adapter harness
898289T83
2
1
CDS G3 SmartCraft diagnostic interface
898289T81
3
1
G3 engine harness adapter (with resistor)
8M0046081
4
1
Mercury Computer Diagnostic System G3 program disc
8M0098655
CDS G3 Overview
CDS G3 is a stand‑alone program that complements the original Mercury Computer Diagnostic System (CDS) by providing
diagnostic support for select engines and Mercury Joystick Piloting systems. Additionally, all configuration functions
necessary for preparing these systems for delivery are supported. CDS G3 allows for CAN‑based multiple‑processor
communication through a clean, easy‑to‑navigate interface.
