2. DHCP Client
: DHCP Client connection means that ISP will
dynamically assign the IP address to Broadband Router. No
other settings is needed, ISP will assign all values autoatically.
If your Internet connection type is DHCP client type, like
Cable modem, you should choose this option
When all settings are finished, don
forget to type Y to
restart system.
3. PPP over Ethernet:
PPPoE (point to point protocol over
Ethernet) connection means that personal users can browse
Internet through DSL-based broadband connection. If you are
connected to the Internet through a DSL line, check your ISP
if they use PPPoE. If they do, choose PPPoE option then
type in:
Your PPPoE account and PPPoE password.
(The
PPPoE Service Name may be optional. It depends on the
ISP).
Dial on Demand:
Choose this option, Broadband Router
will attempt to connect with ISP, if (1) there is at least one
LAN user would like to access Internet and (2) the current
WAN connection is on disconnected condition.
Auto disconnect when idled over sec:
fill in a time
period in seconds if you want to disconnect automatically
when your Internet connection is idle more than a period
of time.
When all settings are finished, don
forget to type Y to restart
system.
36
