Figure 2-2 The hardware connection of LAN interface for
Broadband Router.
Please use crossover RJ-45 cable, if you want to connect the
LAN port to another hub or switch.
Once both WAN/LAN are connected successfully,
please hold down the reset button continuously for 5 seconds
to make sure Broadband Router is on factory default
condition now.
2.3 Network Setting in Administrator
computer
In order to configure the Broadband Router with a networked
PC in LAN, it is necessary for administrator to have an
accurate network setting in this PC, then the communication
between Broadband Router and administrator' PC could be
possible. The following description assumes Broadband
Router is on factory default condition. (If not, please hold the
reset button down for more than 5 seconds). Broadband
Router LAN interface IP will become 192.168.8.1 and the
DHCP server for LAN user is on (offered IP range from
192.168.8.17 to 192.168.8.128 by default).
13
