Mercury 2004 Marauder Скачать руководство пользователя страница 51

Страница: 51 / 224

Setting speed control

The controls for using your speed
control are located on the steering
wheel for your convenience.

1. Press the ON control and release
it.

2. Accelerate to the desired speed.

3. Press the SET ACCEL control
and release it.

4. Take your foot off the accelerator
pedal.

Note:

•

Vehicle speed may vary when driving up and down a steep hill.

•

If the vehicle speed increases above the set speed on a downhill, you
may want to apply the brakes to reduce the speed.

•

If the vehicle speed decreases more than 16 km/h (10 mph) below
your set speed on an uphill, your speed control will disengage.

Disengaging speed control

To disengage the speed control:

•

Depress the brake pedal

Disengaging the speed control will not erase previous set speed.

Resuming a set speed

Press the RESUME control and
release it. This will automatically
return the vehicle to the previously
set speed. The RESUME control will
not work if the vehicle speed is not
faster than 48 km/h (30 mph).

2004 Marauder (mdr)
Owners Guide (post-2002-fmt)
USA English (fus)

Driver Controls

Содержание 2004 Marauder

































































































































































































































Результаты поиска

Содержание 2004 Marauder

Отзывы:

Похожие инструкции для 2004 Marauder

Бренды по названию

Популярные бренды

Mercury 2004 Marauder, Руководство пользователя

Результаты поиска

Содержание 2004 Marauder

Отзывы:

Похожие инструкции для 2004 Marauder

Бренды по названию

Популярные бренды