Mercury 2004 Marauder Скачать руководство пользователя страница 144 | Manualshive

Страница: 144 / 224

Mercury 2004 Marauder Скачать руководство пользователя страница 144

•

Never use the rear differential
as a jacking point.

6. Remove the lug nuts with the lug wrench.

7. Replace the flat tire with the spare tire, making sure the valve stem is
facing outward. Reinstall lug nuts until the wheel is snug against the hub.
Do not fully tighten the lug nuts until the wheel has been lowered.

8. Lower the vehicle by turning the jack handle counterclockwise.

9. Remove the jack and fully tighten
the lug nuts in the order shown.
Refer to

Wheel lug nut torque

specifications

later in this chapter

for the proper lug nut torque
specification.

10. Put flat tire, jack and lug wrench away. When stowing the flat tire, be
sure to tie down the tire by turning the fastener clockwise until snug.

Note:

To make sure the road wheel is properly stowed:

•

Place the jack bag on the trunk
shelf as shown in the illustration.
Place the road wheel on the shelf
area of the trunk with the valve
stem facing up.

•

Use the tie-down fastener from
the bag as shown.

•

Reach under and insert the hook
end of the fastener to the shelf
floor.

1

4

3

2

5

2004 Marauder (mdr)
Owners Guide (post-2002-fmt)
USA English (fus)

Roadside Emergencies

144

«
...
142
143
144
145
146
...
»

Содержание 2004 Marauder

































































































































































































































Отзывы:

Нет отзывов