Mercury 2004 Marauder Скачать руководство пользователя страница 19

Страница: 19 / 224

Fade:

Allows you to shift speaker

sound between the front and rear
speakers. Press FADE then press
SEL to shift the sound to the rear

or the front

COMP (Compression):

In CD

mode, press to bring soft and loud
passages together for a more
consistent listening level.

SHUF (Shuffle):

Press to play CD

tracks in random order.

Select:

Use to adjust bass, treble,

balance and fade levels.

Side 1–2:

Press to change sides

on the tape.

Dolby:

Dolby

noise

reduction:

Reduces tape noise and

hiss; press to activate/deactivate.

REW (Rewind):

Works in tape

and CD modes.

In tape mode, radio play continues
until rewind is stopped (with the TAPE control) or the beginning of the
tape is reached.

In CD mode, REW control reverses the CD within the current track.

FF (fast forward):

Works in tape

and CD modes.

In the tape mode, tape direction
automatically reverses when the end of the tape is reached.

In CD mode, FF advances the CD within the current track.

Digital signal processing:

Press

to adjust the occupancy modes
between the following:.

•

ALL SEATS

•

DRIVER SEAT

•

REAR SEATS

2004 Marauder (mdr)
Owners Guide (post-2002-fmt)
USA English (fus)

Entertainment Systems

Содержание 2004 Marauder

































































































































































































































Результаты поиска

Содержание 2004 Marauder

Отзывы:

Похожие инструкции для 2004 Marauder

Бренды по названию

Популярные бренды

Mercury 2004 Marauder, Руководство пользователя

Результаты поиска

Содержание 2004 Marauder

Отзывы:

Похожие инструкции для 2004 Marauder

Бренды по названию

Популярные бренды