Mercury 2004 Marauder Скачать руководство пользователя страница 13

Страница: 13 / 224

Turn signal:

Illuminates when the

left or right turn signal or the
hazard lights are turned on. If the
indicators stay on or flash faster, check for a burned out bulb.

High beams:

Illuminates when the

high beam headlamps are turned on.

Headlamps on warning chime:

Sounds when the headlamps or parking

lamps are on, the ignition is off (the key is not in the ignition) and the
driver’s door is opened.

Key-in-ignition warning chime:

Sounds when the key is left in the

ignition in the OFF/LOCK or ACCESSORY position and the driver’s door
is opened.

GAUGES

Speedometer:

Indicates the

current vehicle speed.

2004 Marauder (mdr)
Owners Guide (post-2002-fmt)
USA English (fus)

Instrument Cluster

Содержание 2004 Marauder

































































































































































































































Результаты поиска

Содержание 2004 Marauder

Отзывы:

Mercury 2004 Marauder, Руководство пользователя, Страница: 13 / 224

Результаты поиска

Содержание 2004 Marauder

Отзывы: