Mercury 2004 Marauder Скачать руководство пользователя страница 171

Страница: 171 / 224

•

If required, add engine oil to the
engine. Refer to

Adding engine

oil

in this chapter.

•

Do not overfill the engine
with oil. Oil levels above this
mark may cause engine
damage.

If the engine is

overfilled, some oil must be
removed from the engine by a
qualified service technician.

7. Put the indicator back in and ensure it is fully seated.

Adding engine oil

1. Check the engine oil. For instructions, refer to

Checking the engine

oil

in this chapter.

2. If the engine oil level is not within the normal operating range, add
only certified engine oil of the recommended viscosity. Remove the
engine oil filler cap and use a funnel to pour the engine oil into the
opening.

3. Recheck the engine oil level. Make sure the oil level is not above the
normal operating range on the engine oil level indicator (dipstick).

4. Install the indicator and ensure it is fully seated.

5. Fully install the engine oil filler cap by turning the filler cap clockwise
until three clicks can be heard.

To avoid possible oil loss, DO NOT operate the vehicle with the
engine oil level indicator and/or the engine oil filler cap removed.

2004 Marauder (mdr)
Owners Guide (post-2002-fmt)
USA English (fus)

Maintenance and Specifications

171

Содержание 2004 Marauder

































































































































































































































Результаты поиска

Содержание 2004 Marauder

Отзывы:

Похожие инструкции для 2004 Marauder

Бренды по названию

Популярные бренды

Mercury 2004 Marauder, Руководство пользователя

Результаты поиска

Содержание 2004 Marauder

Отзывы:

Похожие инструкции для 2004 Marauder

Бренды по названию

Популярные бренды