Mercury/Mariner 25 MARATHON Скачать руководство пользователя страница 19

Страница: 19 / 130

Section 1 - Warranty

90-8M0074347

eng

OCTOBER 2012

Page 11

•

Purchased from an insurance company that obtained the product as a result of an insurance claim

•

Purchased from a salvage yard

•

Repossession from a retail customer

•

Purchased at an auction

Conditions That Must Be Met to Obtain Warranty Coverage

Warranty coverage under this Limited Warranty is available only to retail customers that purchase from a dealer authorized by

Mercury Marine to distribute the product in the country in which the sale occurred, and then only after the predelivery inspection

process specified by Mercury Marine is completed and documented. Warranty coverage becomes available upon proper

registration of the product by the authorized dealer. Inaccurate warranty registration information regarding recreational use or

subsequent change of use from recreational to commercial (unless properly registered) may void the warranty at the sole

discretion of Mercury Marine. Routine maintenance must be performed according to the maintenance schedule in the

Operation, Maintenance, and Warranty manual in order to obtain warranty coverage. Mercury Marine reserves the right to

make any warranty coverage contingent upon proof of proper maintenance.

What Mercury Will Do

Mercury Marine's sole and exclusive obligation under this Limited Warranty is limited to, at our option, repairing a defective part,

replacing such part or parts with new or Mercury Marine certified remanufactured parts, or refunding the purchase price of the

Mercury Marine product. Mercury Marine reserves the right to improve or modify products from time to time without assuming

an obligation to modify products previously manufactured.

How to Obtain Warranty Coverage Under This Limited Warranty

The customer must provide Mercury Marine with a reasonable opportunity to repair and reasonable access to the product for

warranty service. Warranty claims shall be made by delivering the product for inspection to a Mercury Marine dealer authorized

to service the product. A list of dealers and their contact details is available at

http://www.mercurymarine.com.au/home.aspx

. If

the purchaser cannot deliver the product to such a dealer, written notice must be given to Mercury Marine at the address shown

above. Mercury Marine will then arrange for the inspection and any covered repair. This Limited Warranty will not cover the

purchaser for all related transportation charges and travel time. If the service provided is not covered by this limited warranty,

the purchaser shall pay for all related labor and material and any other expenses associated with that service, provided that a

consumer will not be obligated to pay where the service has been carried out to remedy a failure of an acceptable quality

guarantee which is binding on Mercury Marine under the Australian Consumer Law. The purchaser shall not, unless requested

by Mercury Marine, ship the product or parts of the product directly to Mercury Marine. Proof of registered ownership must be

presented to the dealer at the time warranty service is requested in order to obtain coverage under this Limited Warranty.

What is Not Covered

This limited warranty does not cover the following:
•

Operating the boat with the engine over trimmed

•

Routine maintenance items

•

Adjustments

•

Normal wear and tear

•

Damage caused by abuse

•

Abnormal use

•

Use of a propeller or gear ratio that does not allow the engine to run in its recommended RPM range. Refer to the

Operation, Maintenance, and Warranty manual.

•

Operation of the product in a manner inconsistent with the recommended operation and duty cycle section of the

Operation, Maintenance, and Warranty manual.

•

Neglect

•

Accident

•

Submersion

•

Improper installation (proper installation specifications and techniques are set forth in the installation instructions for the

product)

•

Improper service

•

Use of an accessory or part that was not manufactured or sold by Mercury Marine that causes damage to the Mercury

product

•

Jet pump impellers and liners

•

Operation with fuels, oils, or lubricants that are not suitable for use with the product. Refer to the Operation, Maintenance,

and Warranty manual.

Содержание 25 MARATHON



































































































































Результаты поиска

Содержание 25 MARATHON

Отзывы:

Похожие инструкции для 25 MARATHON

Бренды по названию

Популярные бренды

Mercury/Mariner 25 MARATHON, Руководство пользователя

Результаты поиска

Содержание 25 MARATHON

Отзывы:

Похожие инструкции для 25 MARATHON

Бренды по названию

Популярные бренды