manualshive.com logo in svg

Mercury/Mariner 25 MARATHON, Руководство пользователя, Страница: 60 / 130

Поделиться
Скачать
Mercury/Mariner 25 MARATHON Скачать руководство пользователя страница 60

Section 4 - Specifications 

Page  52

90-8M0074347   

eng

  OCTOBER  2012

NOTE: We do not recommend nondetergent oils, multi‑viscosity oils (other than as specified), non FC‑W–rated synthetic oils,

low‑quality oils, or oils that contain solid additives.

Mercury Full-Synthetic  MerCruiser Engine Oil, 20W-40, NMMA FC-W rated

MerCruiser/Quicksilver 25W-40 Synthetic Blend, NMMA FC-W rated 4-cycle MerCruiser oil

Other recognized brands of NMMA FC-W rated oils

SAE 20W

SAE30W

SAE40W

AIR TEMPERATURE

ORDER OF PREFERENCE

(32° F)

 0° C

(50° F)

10° C

32878

Mercury/Quicksilver 25W-40, NMMA FC-W rated 4-cycle MerCruiser oil

Fluid Specifications

Sterndrives

NOTE: Oil capacity includes the drive lube monitor.

Model

Capacity

Fluid Type

Alpha One

1892 mL   (64 oz)

High Performance Gear Lubricant

Engine

IMPORTANT: All capacities are approximate fluid measures.

3.0 MPI

Capacity

Fluid Type

Engine oil (with filter)

3.8 L  (4 US qt)

Mercury Full‑Synthetic MerCruiser 20W‑40, NMMA FC‑W rated oil.

Seawater cooling system 9 L (8.5 US qt)

Propylene glycol and purified water

Closed cooling system

9  L (8.5 US qt) Mercury Extended Life Coolant Antifreeze or extended life ethylene glycol 5/100

antifreeze mixed 50/50 with purified water

Specifications—3.0 TKS

Engine Specifications—3.0 TKS

NOTE: Performance specifications are obtained and corrected in accordance with SAE J1228/ISO 8665 Crankshaft Power.

All measurements are taken with the engine at normal operating temperature.

RPM range is measured using an accurate service tachometer with the engine at normal operating temperatures.

Oil pressure must be checked with the engine at normal operating temperature.
NOTE: Oil pressure specifications are for reference and may vary.

Propshaft power

101 kW (135 hp)

Displacement

3.0 L (181 cid)

Alternator amperage

Hot

72 A

Cold

65 A

RPM

WOT

4400–4800

Rev limiter

4950

Idle in neutral

700

Содержание 25 MARATHON



































































































































Отзывы:

Нет отзывов