MerCruiser Vazer 100, Руководство пользователя

Страница: 70 / 118

Section 5 - Maintenance
Page 62 90-899883182 NOVEMBER 2007
4. Pull tether through the bilge drain.
f
e
d
c
b
a
7284
a - Bilge drain plug
b - Tether
c - Clip
d - Oil drain hose plug
e - Oil drain hose
f - Bilge drain flange
5. Place the oil drain hose in a suitable container.
6. Remove the drain plug from the oil drain hose.
7. After oil has drained completely, install the drain plug in the oil drain hose.
8. Push the hose through bilge drain and install the plug.
9. Replace the engine oil filter. See
Changing the Oil Filter
.
Engine Oil Drain Pump
NOTE: This is an alternate method to utilize the
Easy Engine Oil Drain System
hose.
IMPORTANT: The oil drain pump can only be used if the Easy Engine Oil Drain System is
not connected to the bilge drain plug.
1. Loosen the oil filter to vent the system.
2. Allow sufficient time for the oil to drain from the filter down into the engine block.
3. Raise the engine oil drain hose so that the plug end is above the engine.
4. Remove the drain plug from the oil drain hose.
5. Attach an appropriate hose barb fitting to the oil drain hose that will connect to an oil
removal pump .