6
Key functions are as follows:
INDEX:
Pressing the
INDEX key for 2 seconds
will bring up the Secondary menu starting at the
SP1H
menu item. Holding the key for 5 seconds will
bring up the Secure menu starting with the menu
item
SECr
. Once in the menus, pressing the
INDEX key advances the display to the next menu
item. May also be used in conjunction with other
keys as noted below.
SYSTEM TEST:
When Test menu item is ˝On˝
depressing this key for three seconds will make the
MPC Pump Controller go through a system test.
See page 10 for explanation of system test function.
UP ARROW:
Increments a value, changes a
menu item, or selects the item to ON. The maximum
value obtainable is 9999 regardless of decimal
point placement.
DOWN ARROW:
Decrements a value, changes a
menu item, or selects the item to OFF. The
minimum value obtainable is -1999 regardless of
decimal point placement.
ENTER:
The
ENTER key is used to store
the value of menu items once they are changed to
a new value. If the
ENTER key is not pressed
after changing the value the item will revert to the
previously stored value.
PUMP RUN TIME:
Pressing this key will cause
the MPC Pump Controller to display the total run
time (in hours) that the pump(s) have been on since
the last reset.
FRONT PANEL FUNCTIONS
PUMP 1
ON LAMP
ALARM LAMPS
PUMP 1 SEAL
FAILURE LAMP
PUMP 2 SEAL
FAILURE LAMP
PUMP 1 OVER
TEMPERATURE
LAMP
PUMP 2 OVER
TEMPERATURE
LAMP
PUMP RUN
TIME LAMP
PUMP 2
ON LAMP
LEVEL
DISPLAY
1ST SET
POINT
DISPLAY
SYSTEM
TEST
LAMP
www.
.com
1.800.561.8187
