P 7
Please retain product label and instructions for future reference
IMPORTANT :
Pre-drill before fixing screws.
8
11
9
10
Step 7
Parts Needed - No. 8 QTY 1
No. 9 QTY 1
No. 10 QTY 1
No. 11 QTY 1
Arrange the left, right, top & bottom door
frames (
No’s. 8, 9, 10, & 11
) onto a firm and
level surface. Secure the top and bottom
frames to the uprights using 2x80mm screw
per corner, ensuring the screws do
NOT
protrude through the front of the door framing.
8x80mm Screws
Pre drill
hole
80mm
screw
The internal lip of the window
frame should be postioned on
the inside of the building.
11
9
Step 8
Parts Needed - No. 21 QTY 18
Once you have laid 6 boards (off
of the starter) on the front corner,
locate one of the assembled window
frames onto the log cabin as shown in
the illustration.
Ensure the window frame is resting
on top of the starter board and the
log boards
(No.20)
are locted flush
into one side of the window frame.
**If you have not yet assembled your
window frames please refer to steps
5&6.
Once the window frame is in
position, place the log boards
(No.21)
flush into the other side of
the window frame, securing it in
place.
*Ensure that the boards are level
and flush with each other as you lay
each one.
a
b
a
b
20
21
