P 10
Please retain product label and instructions for future reference
24
25
25
22
20
20
Rubber Mallet
may be required
to fit parts.
Step 13
Parts Needed - No. 20 QTY 12
No. 22 QTY 6
No. 24 QTY 6
No. 25 QTY 12
Following the method shown in
the illustration, lay the next 6
boards (
No’s. 20, 22, 24 & 25
)
onto the assembly to create
your second level.
*Ensure that the boards are
level and flush with each other
as you lay each one.
Rubber Mallet
may be required
to fit parts.
Step 14
Parts Needed - No. 22 QTY 1
No. 36 QTY 1
Following the method shown in the
illustration, remaining log boards
(No.22 & 36)
onto the front and
back of the log cabin.
*Ensure that the boards are level
and flush with each other as you
lay each one.
22
36
17
18
Pre drill
hole
70mm
screw
Rubber Mallet
may be required
to fit parts.
Step 15
Parts Needed - No. 17 QTY 1
No. 18 QTY 1
Place the gable tops (
No. 17 & 18
)
onto the building. Fix into position
by screwing through the notches
as shown in the illustration.
*Ensure that the boards are level
and flush with each other as you
lay each one.
4x70mm Screws
IMPORTANT :
Pre-drill before fixing screws.
