P 13
Please retain product label and instructions for future reference
7
13
Pre drill
hole
30mm
screw
Step 20
Parts Needed - No. 7 QTY 1
No. 13 QTY 2
Once the roof is fixed,
place door
(No.7)
onto a flat surface and fix
2xT-hinges
(No.13)
to each door using
5x30mm black screws per hinge.
Locate the doors into the door frame on
the cabin, ensuring there is equal
spacing on each side between the door
and door frame.
Secure into position by screwing
through the T-hinges
(No.13)
using
4x30mm black screws per hinge,
making sure the doors open & close
freely without restriction
*Ensure to screw into the framing and
not into the channel.
18x30mm Black Screws
IMPORTANT:
Pre-drill before fixing screws.
Pre drill
hole
30mm
screw
Step 21
Parts Needed - No. 14 QTY 1
No. 15 QTY 1
No. 16 QTY 1
Fit the Mortice Lock (
No. 15
) into the
recess in the glazed door (
No. 1
) and secure
using the 2x30mm screws provided. Attach
the Key Plate (
No. 16
) to the door framing
with 2x30mm screws.
Fit the door handles (
No. 14
) and
connect with the metal bar to the mortice
lock using 8x30mm screws. Ensure the lock
mechanism closes correctly. If not, remove
the lock and turn the catch around using
the small grub screw.
*Please note:
This image is for illustrative
purposes and may differ from your choice in
product (
regarding ironmongery
).
Nevertheless the process of fixing to the
door(s) is the same.
8x30mm Black Screws
4x30mm Screws
a
b
The Mortice Lock is Reversible
a
b
14
16
15
30mm
screw
IMPORTANT:
Pre-drill before fixing screws.
