Mercia Garden Products 01DTSHRAX1008SDNW-V1, Общее руководство по инструкции, Страница: 9 / 12

P 9
Please retain product label and instructions for future reference
Use 4x30mm Screws to fix
each Door Beading Strip
(No. 11) onto the insides of
the Door Panel
(No. 1)
opening. Ensure that the
screw is parallel with the
door frame when fixing the
strip to the Door Panel as
shown in the close up view.
8x30mm Screws
Attach the Inner Door Block (No.
9)
to the door
(No. 4)
using
2x30mm screws, in the positions
illustrated. Screw through the
door cladding into the blocks
using 30mm screws
2x30mm Screws
Step 18
Parts needed - No. 9 QTY 1
No. 11 QTY 2
30mm
screw
30mm
screw
Pre drill
hole
Pre drill
hole
11
11
a
b
a
b
9
Step 19
Parts needed - No. 21 QTY 1
Screw the Pad Bolt (No. 21) on to the door
(No. 4)
and the retainer to the door panel
(No. 1)
using 10x30mm screws. Make
sure that you screw into the framing behind.
10x30mm Screws.
Pre drill
hole
30mm
screw
21
Step 20
Parts needed - No. 17 QTY 2
Fix the Turn Button (No. 17) onto the
Door Panel
(No. 1)
using 1x30mm
screw for each one.
*These turn buttons help to keep
your doors straight during high
and low levels of moisture content
in the air.*
2x30mm Screws
30mm
screw
Pre drill
hole
17