Mercedes-Benz S-Class Coupe, Руководство пользователя

Страница: 104 / 413

Convenience opening feature
X
Press and hold the % button until the
side windows are in the desired position.
The roller sunblind of the panorama roof
opens.
X
To interrupt convenience opening:
release the % button.
Convenience closing feature
Important safety notes
G WARNING
When using convenience closing, you could
become trapped within the sweep of the clos-
ing window. There is a risk of injury.
Monitor the entire closing procedure when
using convenience closing. When closing,
make sure that no one has any parts of the
body within the closing area.
You can close the side windows and the roller
sunblind for the panorama roof after you lock
the vehicle.
i Notes on the automatic reversing feature
for:
R
the side windows (
Y
page 99)
R
the roller sunblind (
Y
page 102)
Using the key
X
Press and hold the & button until the
side windows and the roller sunblind of the
panorama roof are fully closed.
X
Make sure that all the side windows are
closed.
X
To interrupt convenience closing:
release the & button.
Using KEYLESS-GO
The key must be outside the vehicle. All the
doors must be closed.
X
Touch recessed sensor surface : on the
door handle until the side windows and the
roller sunblind of the panorama roof are
fully closed.
i
Make sure you only touch recessed sen-
sor surface : .
X
Make sure that all the side windows are
closed.
X
To interrupt convenience closing:
release recessed sensor surface : on the
door handle.
Resetting the side windows
If a side window can no longer be closed fully,
you must reset it.
X
Close all doors.
X
Turn the key to position 1 or 2 in the ignition
lock (
Y
page 159).
X
Pull the corresponding switch on the door
control panel until the side window is com-
pletely closed (
Y
page 100).
X
Hold the switch for an additional second.
If the side window opens again slightly:
X
Immediately pull the corresponding switch
on the door control panel until the side win-
dow is completely closed (
Y
page 100).
X
Hold the switch for an additional second.
X
If the corresponding side window remains
closed after the button has been released,
the side window has been reset correctly. If
this is not the case, repeat the steps above
again.
Side windows
101
Op
ening
and
closing
Z