Mercedes-Benz S-Class Coupe, Руководство пользователя

Страница: 373 / 413

X
Shift the automatic transmission to posi-
tion N.
X
Release the brake pedal.
X
Release the electric parking brake.
X
Leave the key in position 2 in the ignition
lock.
X
Switch on the hazard warning lamps
(
Y
page 126).
i
In order to signal a change of direction
when towing the vehicle with the hazard
warning lamps switched on, use the com-
bination switch as usual. In this case, only
the turn signals for the desired direction
flash. When you reset the combination
switch, the hazard warning lamps start
flashing again.
Transporting the vehicle
!
You may only secure the vehicle by the
wheels, not by parts of the vehicle such as
axle or steering components. Otherwise,
the vehicle could be damaged.
The towing eye can be used to pull the vehicle
onto a trailer or transporter for transporta-
tion.
X
Turn the key to position 2 in the ignition
lock.
X
Shift the automatic transmission to posi-
tion N.
As soon as the vehicle is loaded:
X
Prevent the vehicle from rolling away by
applying the electric parking brake.
X
Shift the automatic transmission to posi-
tion P.
X
Turn the key to position 0 in the ignition
lock and remove it.
X
Secure the vehicle.
Notes for 4MATIC vehicles
! Vehicles with 4MATIC must not be towed
with the front or rear axle raised; otherwise,
the transmission may be damaged.
Vehicles with 4MATIC may either be towed
away with both axles on the ground or be loa-
ded up and transported.
If the vehicle has transmission damage or
damage to the front or rear axle, have it trans-
ported on a transporter or trailer.
In the event of damage to the electrical
system: if the battery is defective, the auto-
matic transmission will be locked in position
P. To shift the automatic transmission to posi-
tion N, you must provide power to the vehi-
cle's electrical system in the same way as
when jump-starting (
Y
page 364).
Have the vehicle transported on a transporter
or trailer.
Tow-starting (emergency engine
starting)
! Do not tow-start vehicles with automatic
transmission. You could otherwise damage
the automatic transmission.
i
Information on "Jump-starting"
(
Y
page 364).
Electrical fuses
Important safety notes
G WARNING
If you manipulate, bridge or replace a faulty
fuse with a fuse of a higher amperage, the
electric cables could be overloaded. This may
result in a fire. There is a risk of an accident
and injury.
Always replace faulty fuses with specified new
fuses of the correct amperage.
Blown fuses must be replaced with fuses of
the same rating, which you can recognise by
370
Electrical fuses
Breakdo
wn
ass
is
tanc
e