Mercedes-Benz S-Class Cabriolet 2017, Руководство пользователя

Страница: 405 / 525

The jack is maintenance-free. If there is a
malfunction, please contact a qualified spe‐
cialist workshop.
The tyre-change tool kit is located under the
boot floor.
1 Ratchet
2 Centring pin
3 Jacking support
4 Jack
5 Wheel wrench
6 Folding chock
Setting up the folding chock
Preparing the vehicle for a wheel change
Requirements:
R
The required tyre-change tool kit is available.
If your vehicle is not equipped with the tyre-
change tool kit, consult a qualified specialist
workshop to find out about suitable tools.
R
The vehicle is not on a slope.
R
The vehicle is on solid, non-slippery and level
ground.
#
Apply the electric parking brake manually.
#
Move the front wheels to the straight-ahead
position.
#
Vehicles with automatic transmission:
shift into position j .
#
Vehicles with AIR BODY CONTROL: set the
normal vehicle level (
→
page 191).
#
Switch off the engine.
#
Make sure that the engine cannot be started.
#
Place chocks or other suitable items under
the front and rear of the wheel that is diago‐
nally opposite the wheel you wish to change.
#
Remove the hub caps if necessary
(
→
page 403).
#
Raising the vehicle (
→
page 403).
402 Wheels and tyres